BORING OF CYLINDRICAL SURFACES IN METAL PARTS OR PRODUCTS

We offer our customers a wide range of services related to metal processing. One of the most popular operations that customers often order is boring. This processing option is designed to make a hole in the part (or already finished product) that exceeds the standard drill size. Such a result cannot be achieved by reaming.

 

Price - price list of turning works

In addition, the service is relevant in cases where the geometry is broken in the nodes of the mechanism, a serious malfunction occurs. This leads to damage to equipment, the purchase of new parts (in most cases quite expensive), and costs. Fortunately, thanks to our modern equipment, the problem is completely solvable - boring will return the product to its original geometry. Thus, you will be able not only to save on the purchase of spare parts, but also to avoid long downtime of equipment.

 

Also boring of cylindrical surfaces in metal parts or products is performed in the case when it is necessary to machine holes with a non-rectilinear generatrix. Turning works are carried out on the latest, automated equipment, with a certain type of cutters. The exact result is guaranteed.

ADVANTAGES OF THE PROCESSING METHOD

We offer our clients the following services:

 

• we create parts and blanks of various shapes;

 

• we work with all types of metals and alloys;

 

• we can produce a large number of products in the shortest possible time and without loss of quality;

 

• we guarantee that the processing will be performed at a high level;

 

• we work with products and parts of large diameter;

 

• we observe the exact value up to several tens of microns.

 

If you need quality work in a short time, then contact us - we will solve this problem.

PROCESS AUTOMATION

For boring, automated machines are used, in total there are two processing options - finishing and roughing. Our machines are sharpened for large volumes of work, while the quality does not suffer. Automation has greatly simplified the task of the turner and reduced the possibility of errors in measurements. And also managed to achieve the following results:

 

• the productivity of specialists has reached a maximum;

 

• in the work, cutters with an edge of hard alloys are used;

 

• several cutting modes are allowed;

 

• processing of non-ferrous and black types of alloys;

 

• work is carried out according to exact parameters;

 

• complex products are bored without marriage.

 

Manual processing of parts (products) is inferior in quality to automatic, because it is rather difficult to ensure accuracy in this case.

CONTACT US ASAP!

Specialized equipment and car parts are subjected to active use every day, due to which the holes begin to change shape and deform in every possible way. In this regard, there are problems in the operation of mechanisms and working surfaces.

 

If the problems are ignored, then this will lead to large costs, you will have to allocate funds for major repairs. In the case when the use of the mechanism is carried out in production, then to more serious losses - injuries to employees.

 

We recommend our customers to solve all problems in the operation of the equipment at an early stage. We will help you quickly and within a short time to restore the geometry of the hole, regardless of the complexity of the task. The price for the service is calculated for each client individually, and it is much lower than the cost of a major overhaul. Contact us and we will extend the life of your equipment.